The Flashcar Cosmetic Eliminator Pre-Wash is a hard shampoo developed for intensive pre-washing. Its highly concentrated formula breaks static film and loosens stubborn road grime, insects, brake dust, hydrocarbons and mud. Designed for foam cannons, it can also be used with low and high-pressure systems. Applied before the contact wash, it helps lift the dirt, so there is less to rub off.
Safety first
Contains sodium hydroxide and isotridecanol ethoxylate. Causes severe skin burns and serious eye damage. Wear gloves and suitable protective equipment.
Why choose the Eliminator Pre-Wash?
- Breaks static and road film.
- Loosens hydrocarbons, brake dust, insects and mud.
- Concentrated: diluted in a foam cannon.
- For paintwork, clear coats and wheels, never on hot surfaces.
- Foam cannon or sprayer, at low or high pressure.
Dilution
In a foam cannon: 10–20 % Eliminator Pre-Wash with 80–90 % water.
How it works in practice
- Wash away from direct sunlight.
- Never let the product dry on the vehicle.
- Dilute it in the foam cannon as above.
- Apply evenly on the vehicle.
- Leave on for 1 minute.
- Rinse thoroughly with clean water.
After the pre-wash
Move on to the contact wash. A Microfibre Wash Mitt and a Detailing Bucket 20 L with Grit Guard (you need two buckets for the two-bucket method) go well with it.
Which product?
- Eliminator Pre-Wash (this product): the pre-wash before the contact wash.
- Anti-Insect: for dried insects on paint and glass.
- Iron Remover: for iron particles and brake dust, with a colour change.
- Tar & Glue Remover: for tar and glue residues.
Sizes
Available in 500 ml and 5 L. See the Product Usage tab for the full steps.