Flashcar's Fine Cut Polish is a professional finishing polish that leaves an ultra-smooth, high-gloss finish while gently removing light swirls and holograms. Paired with the Thermo Pad Black, it gives a deep, mirror-like result, for detailers and enthusiasts who care about the final finish.
The formula is silicone-free and generates very little dust, so it is easy to work with and wipes off quickly and cleanly. It suits all clear coats, including soft and dark paints.
Why choose the Fine Cut Polish?
- A high gloss level and an ultra-smooth finish.
- Removes fine swirls and holograms left by earlier stages.
- Very low dust and easy to wipe off.
- Silicone-free formula.
- Suitable for all clear coats, including soft and dark finishes.
What it is for
The final polishing stage: it refines the paint after a heavier cut and brings out gloss. The surface stays smooth and ready to be protected with a wax, a sealant or a ceramic coating.
The right setup
- Pad: the Thermo Pad Black.
- Machine: rotary or dual-action polisher, at low to medium speed.
- Amount: a small amount on the pad.
Fine Cut Polish or Medium Cut Polish?
Choose the Medium Cut Polish to correct moderate defects and swirls and boost gloss in a single stage. Choose the Fine Cut Polish as the last stage, to remove the finest swirls and holograms and get the highest gloss, usually after a heavier cut such as the Heavy Cut Polish.
How to use it
Shake well, apply a small amount to a suitable pad, work in overlapping passes at low to medium speed, then wipe off immediately with a clean microfibre. Do not apply on hot panels or in direct sunlight. See the Product Usage tab for the full steps and precautions.
Available in 250 ml and 1 L.